+ mach1mach2cnc at Yahoo! Groups +

Mach1,Mach2 and Mach3 ...

Last Update: Sat Jun 20 06:22:29 2009

+ Re: Burnning diodes + Ok, assuming the diodes are good for 3A then it would seem you have an issue with your current limiter allowing too much current at ...

+ Help! Stops at Line 10 + Thanks to all who had input for max question. Now this thing stops at line 10 every time. Any ideas would be appreciated. Thanks, ...

+ Re: Laser cutting power proportional to feedrate + Thanks Art, Your explanation makes perfectly sense. That is the info that I needed. The timing of your answer is very good since this ...

+ Re: Burnning diodes + Saludos cordiales. Hi, first you are wrigth english in not my first language, about the diodes they are directly conected to the ...

+ Re: Laser cutting power proportional to feedrate + Bertho: Depends on the laser how well it works, but if you turn on the "Laser Mode" in the spindle config tab, and set it to PWM ...

+ Laser pulse measurements + I need to measure the rise and fall times of CO2 laser pulses. Not power, just relative amplitude vs. time. Regular photo diodes are ...

+ Laser cutting power proportional to feedrate + To get uniform cutting depth the laser power needs to be proportional to the actual feed rate which will vary as the laser head ...

+ Re: motor tuning + Pat: Use sherline mode.. those are slow drivers. Sherline mode will give you 40us per step.. Thanks, Art ... From: dundrumpat To: ...

+ Re: Burnning diodes + Well it Could be, could be, could be... From a trouble shooting perspective " is the power good " is always one of my leading ...

+ Re: Trigonometry + Many thanks, I've finished the VB and math, and the screen is about 85% finished, only some button graphics to go. I used 4*atn(1) ...

+ Re: Fly out pendant / touch screen + Thanks Troy & Gaston ! Exactly what I was looking for - pass the dunce cap ;-) All the best, Henry From: ...

+ Re: Fly out pendant / touch screen + In Screen4 click the TAB button at top of screen. HTH ...

+ Re: Fly out pendant / touch screen + Are you referring to page 50 (click icon 1,2.. in the tool bar)? ...

+ Re: Trigonometry + ... Hi Ozzie, this is what I do: 'Declare Array 'Declare Math Private Const pi As Double = 3.14159265358979 Dim Distance As ...

+ Fly out pendant / touch screen + I would like to edit the size and shape of some of the buttons on the fly out pendant in Mach, for a touch screen But I cannot find ...